European Journal of Chemistry

The effect of different molecular weight chitosan on the physical and mechanical properties of plasticized films

Crossmark


Main Article Content

Sara Hikmet Mutasher
Hadi Salman Al-Lami

Abstract

Packaging materials based on biodegradable polymers are a viable alternative to replacing conventional plastic packaging of fossil origin. The main two factors affecting functionality and performance are the molecular weight and the type of plasticizer used in these materials. The goal of this research was to modify unfractionated plasticized chitosan films to improve the physical and mechanical characteristics of the original unfractionated chitosan films. Chitosan extracted from local shrimp shells was zone-refined to produce five distinct chitosan fractions with molecular weights ranging from 1.089×105 to 5.605×105 g/mole. The unfractionated and fractionated chitosan films plasticized with 1:3 poly(vinyl alcohol) and 2:1 maleic acid were prepared by casting from their 2% acetic acid solutions. They were examined by FT-IR and were found to be comparable to the native chitosan spectrum, indicating that the primary backbone of the chitosan structure was unaltered. Therefore, the effects of molecular weight fractions and the type of plasticizer on the physical and mechanical properties were investigated. Examining the films’ surface topography by atomic force microscopy revealed that increasing the molecular weight of chitosan fractions from 2.702×105 to 5.605×105 g/mole affects the surface morphology of the chitosan: poly(vinyl alcohol) (1:3) film. This was accompanied by an increase in the surface roughness of the resulting film from 0.953 to 2.82, and for chitosan: maleic acid from 0.509 to 1.62. It was found that the tensile strength and Young’s modulus of the cast films decreased and the percent elongation at break of the plasticized fractionated chitosan films was increased, implying that less stiff films were obtained with fractionated chitosan. The outcome of this work suggests that the biodegradable fractionated chitosan blend film is a promising packaging material and that poly(vinyl alcohol) is the most suitable plasticizer for this formulation.


icon graph This Abstract was viewed 538 times | icon graph Article PDF downloaded 121 times

How to Cite
(1)
Mutasher, S. H.; Al-Lami, H. S. The Effect of Different Molecular Weight Chitosan on the Physical and Mechanical Properties of Plasticized Films. Eur. J. Chem. 2022, 13, 460-467.

Article Details

Share
Crossref - Scopus - Google - European PMC
References

[1]. Czogała, J.; Pankalla, E.; Turczyn, R. Recent attempts in the design of efficient PVC plasticizers with reduced migration. Materials (Basel) 2021, 14, 844-872.
https://doi.org/10.3390/ma14040844

[2]. Santos, T. A.; Oliveira, A. C. S.; Lago, A. M. T.; Yoshida, M. I.; Dias, M. V.; Borges, S. V. Properties of chitosan-papain biopolymers reinforced with cellulose nanofibers. J. Food Process. Preserv. 2021, 45, e15740.
https://doi.org/10.1111/jfpp.15740

[3]. Vuddanda, P. R.; Montenegro-Nicolini, M.; Morales, J. O.; Velaga, S. Effect of plasticizers on the physico-mechanical properties of pullulan based pharmaceutical oral films. Eur. J. Pharm. Sci. 2017, 96, 290-298.
https://doi.org/10.1016/j.ejps.2016.09.011

[4]. Wadey, B. L. Plasticizers. Encyclopedia of Polymer Science and Technology 2001.
https://doi.org/10.1002/0471440264.pst245

[5]. Montilla-Buitrago, C. E.; Gómez-López, R. A.; Solanilla-Duque, J. F.; Serna-Cock, L.; Villada-Castillo, H. S. Effect of plasticizers on properties, retrogradation, and processing of extrusion‐obtained thermoplastic starch: A review. Starke 2021, 73, 2100060.
https://doi.org/10.1002/star.202100060

[6]. Zhang, Z.; Jiang, P.; Liu, D.; Feng, S.; Leng, Y.; Zhang, P.; Haryono, A.; Li, Z.; Li, Y. Synthesis of novel plasticizer ester end-capped oligomeric lactic acid and its plasticizing performance in poly(vinyl chloride). New J. Chem. 2021, 45, 11371-11379.
https://doi.org/10.1039/D1NJ01604K

[7]. Polymers and polymeric composites: A reference series; Palsule, S., Ed.; Springer Berlin Heidelberg: Berlin, Heidelberg, 2017.

[8]. Liu, H.; Adhikari, R.; Guo, Q.; Adhikari, B. Preparation and characterization of glycerol plasticized (high-amylose) starch-chitosan films. J. Food Eng. 2013, 116, 588-597.
https://doi.org/10.1016/j.jfoodeng.2012.12.037

[9]. Alhanish, A.; Abu Ghalia, M. Developments of biobased plasticizers for compostable polymers in the green packaging applications: A review. Biotechnol. Prog. 2021, 37, e3210.
https://doi.org/10.1002/btpr.3210

[10]. Lindström, A. Environmentally friendly plasticizers for PVC: Improved material properties and long-term performance through plasticizer design, Royal Institute of Technology, Stockholm, Sweden, 2007.

[11]. Hossain, M. S.; Iqbal, A. Production and characterization of chitosan from shrimp waste. J. Bangladesh Agric. Univ. 2014, 12, 153-160.
https://doi.org/10.3329/jbau.v12i1.21405

[12]. Al-Lami; Saleh; Jalal; Mutasher The effect of synthesized chitosan grafted poly (N-L-lactide) on human genetic material. Innovaciencia Fac. Cienc. Exactas Fís. Nat. 2018, 6, 1-10.
https://doi.org/10.15649/2346075X.462

[13]. Loconti, J. D.; Cahill, J. W. Zone-refining fractionation of polymers. J. Polym. Sci. A 1963, 1, 3163-3173.
https://doi.org/10.1002/pol.1963.100011011

[14]. Paul, S.; Jayan, A.; Sasikumar, C. S.; Cherian, S. M. Extraction and Purification of chitosan from chitin isolated from sea prawn (Fennero penaeus indicus). Asian J. Pharm. Clin. Res. 2014, 201-204.

[15]. Yacob, N. Determination of viscosity-average molecular weight of chitosan using intrinsic viscosity measurement. J. Nucl. Rel. Tech. 2013, 10, 40-44.

[16]. Yadav, A.; Kujur, A.; Kumar, A.; Singh, P. P.; Gupta, V.; Prakash, B. Encapsulation of Bunium persicum essential oil using chitosan nanopolymer: Preparation, characterization, antifungal assessment, and thermal stability. Int. J. Biol. Macromol. 2020, 142, 172-180.
https://doi.org/10.1016/j.ijbiomac.2019.09.089

[17]. Kasaai, M. R.; Arul, J.; Charlet, G. Intrinsic viscosity-molecular weight relationship for chitosan. J. Polym. Sci. B Polym. Phys. 2000, 38, 2591-2598.
https://doi.org/10.1002/1099-0488(20001001)38:19<2591::AID-POLB110>3.0.CO;2-6

[18]. Sashiwa, H.; Shigemasa, Y.; Roy, R. Dissolution of chitosan in dimethyl sulfoxide by salt formation. Chem. Lett. 2000, 29, 596-597.
https://doi.org/10.1246/cl.2000.596

[19]. Nguyen, S.; Hisiger, S.; Jolicoeur, M.; Winnik, F. M.; Buschmann, M. D. Fractionation and characterization of chitosan by analytical SEC and 1H NMR after semi-preparative SEC. Carbohydr. Polym. 2009, 75, 636-645.
https://doi.org/10.1016/j.carbpol.2008.09.002

[20]. Rhim, J.-W.; Park, H.-M.; Ha, C.-S. Bio-nanocomposites for food packaging applications. Prog. Polym. Sci. 2013, 38, 1629-1652.
https://doi.org/10.1016/j.progpolymsci.2013.05.008

[21]. Mahmoudi, N.; Ostadhossein, F.; Simchi, A. Physicochemical and antibacterial properties of chitosan-polyvinylpyrrolidone films containing self-organized graphene oxide nanolayers. J. Appl. Polym. Sci. 2016, 133, 43194.
https://doi.org/10.1002/app.43194

[22]. Farion, I. A.; Burdukovskii, V. F.; Kholkhoev, B. C.; Timashev, P. S.; Chailakhyan, R. K. Functionalization of chitosan with carboxylic acids and derivatives of them: Synthesis issues and prospects of practical use: A review. Express Polym. Lett. 2018, 12, 1081-1105.
https://doi.org/10.3144/expresspolymlett.2018.95

[23]. Zaboon, M.; Saleh, A.; Al-Lami, H. Synthesis, characterization and cytotoxicity investigation of chitosan-amino acid derivatives nanoparticles in human breast cancer cell lines. J. Mex. Chem. Soc. 2021, 65, 178-188.
https://doi.org/10.29356/jmcs.v65i2.1265

[24]. Sokolova, M. P.; Smirnov, M. A.; Samarov, A. A.; Bobrova, N. V.; Vorobiov, V. K.; Popova, E. N.; Filippova, E.; Geydt, P.; Lahderanta, E.; Toikka, A. M. Plasticizing of chitosan films with deep eutectic mixture of malonic acid and choline chloride. Carbohydr. Polym. 2018, 197, 548-557.
https://doi.org/10.1016/j.carbpol.2018.06.037

[25]. Choudhari, S. K.; Premakshi, H. G.; Kariduraganavar, M. Y. Preparation and pervaporation performance of chitosan-poly(methacrylic acid) polyelectrolyte complex membranes for dehydration of 1,4-dioxane. Polym. Eng. Sci. 2016, 56, 715-724.
https://doi.org/10.1002/pen.24298

[26]. Cobos, M.; González, B.; Fernández, M. J.; Fernández, M. D. Chitosan-graphene oxide nanocomposites: Effect of graphene oxide nanosheets and glycerol plasticizer on thermal and mechanical properties J. Appl. Polym. Sci. 2017, 134, 45092.
https://doi.org/10.1002/app.45092

[27]. Mahdi, A. A. M.; Al-Lami, H. S.; Abdulwahid, A. A. Hazardous Bismarck Brown dye adsorption on graphene oxide and its Chitosan and ethylenediaminetetraacetic acid derivatives. Basrah J. Sci. 2022, 40, 15-42.
https://doi.org/10.29072/basjs.20220102

[28]. Rubilar, J. F.; Cruz, R. M. S.; Silva, H. D.; Vicente, A. A.; Khmelinskii, I.; Vieira, M. C. Physico-mechanical properties of chitosan films with carvacrol and grape seed extract. J. Food Eng. 2013, 115, 466-474.
https://doi.org/10.1016/j.jfoodeng.2012.07.009

[29]. Oliveira, A. C. S.; Santos, T. A.; Ugucioni, J. C.; Rocha, R. A.; Borges, S. V. Effect of glycerol on electrical conducting of chitosan/polyaniline blends. J. Appl. Polym. Sci. 2021, 138, 51249.
https://doi.org/10.1002/app.51249

[30]. Hyder, M. N.; Chen, P. Pervaporation dehydration of ethylene glycol with chitosan-poly(vinyl alcohol) blend membranes: Effect of CS-PVA blending ratios. J. Memb. Sci. 2009, 340, 171-180.
https://doi.org/10.1016/j.memsci.2009.05.021

[31]. El-Hefian, E. A.; Nasef, M. M.; Yahaya, A. H. Preparation and charac terization of chitosan/poly(vinyl alcohol) blended films: Mechanical, thermal and surface investigations. E-J. Chem. 2011, 8, 91-96.
https://doi.org/10.1155/2011/969062

[32]. Shojaee Kang Sofla, M.; Mortazavi, S.; Seyfi, J. Preparation and characterization of polyvinyl alcohol/chitosan blends plasticized and compatibilized by glycerol/polyethylene glycol. Carbohydr. Polym. 2020, 232, 115784.
https://doi.org/10.1016/j.carbpol.2019.115784

[33]. Erbacher, P.; Zou, S.; Bettinger, T.; Steffan, A.-M.; Remy, J.-S. Chitosan-Based Vector/DNA Complexes for Gene Delivery: Biophysical Charac teristics and Transfection Ability. Pharm. Res. 1998, 15, 1332-1339.
https://doi.org/10.1023/A:1011981000671

[34]. Al-Mosawi, H. A.; Al-Lami, H. S.; Awad, N. A. Synthesis and characterization of some recycled polystyrene and Chitosan based copolymers for water hardness removal. Basrah J. Sci. 2021, 39, 496-514.
https://doi.org/10.29072/basjs.2021311

[35]. Lusiana, R. A.; Siswanta, D.; Mudasir, M. Preparation of citric acid crosslinked chitosan/poly(vinyl alcohol) blend membranes for creatinine transport. Indones. J. Chem. 2018, 16, 144-150.
https://doi.org/10.22146/ijc.21157

[36]. Doll, K. M.; Shogren, R. L.; Willett, J. L.; Swift, G. Solvent-free polymerization of citric acid and D-sorbitol. J. Polym. Sci. A Polym. Chem. 2006, 44, 4259-4267.
https://doi.org/10.1002/pola.21535

[37]. Drechsel, H.; Jung, G.; Winkelmann, G. Stereochemical characterization of rhizoferrin and identification of its dehydration products. Biometals 1992, 5, 141-148.
https://doi.org/10.1007/BF01061320

[38]. Hsieh, S.-H.; Huang, Z. K.; Huang, Z. Z.; Tseng, Z. S. Antimicrobial and physical properties of woolen fabrics cured with citric acid and chitosan. J. Appl. Polym. Sci. 2004, 94, 1999-2007.
https://doi.org/10.1002/app.21104

[39]. Mima, S.; Miya, M.; Iwamoto, R.; Yoshikawa, S. Highly deacetylated chitosan and its properties. J. Appl. Polym. Sci. 1983, 28, 1909-1917.
https://doi.org/10.1002/app.1983.070280607

[40]. Pestov, A.; Bratskaya, S. Chitosan and its derivatives as highly efficient polymer ligands. Molecules 2016, 21, 330.
https://doi.org/10.3390/molecules21030330

[41]. Poirier, M.; Charlet, G. Chitin fractionation and characterization in N , N -dimethylacetamide/lithium chloride solvent system. Carbohydr. Polym. 2002, 50, 363-370.
https://doi.org/10.1016/S0144-8617(02)00040-1

[42]. Shiri, S.; Abbasi, N.; Alizadeh, K.; Karimi, E. Novel and green synthesis of a nanopolymer and its use as a drug delivery system of silibinin and silymarin extracts in the olfactory ensheathing cells of rats in normal and high-glucose conditions. RSC Adv. 2019, 9, 38912-38927.
https://doi.org/10.1039/C9RA05608D

[43]. Velickova, E.; Winkelhausen, E.; Kuzmanova, S.; Moldão-Martins, M.; Alves, V. D. Characterization of multilayered and composite edible films from chitosan and beeswax. Food Sci. Technol. Int. 2015, 21, 83-93.
https://doi.org/10.1177/1082013213511807

[44]. Bof, M. J.; Bordagaray, V. C.; Locaso, D. E.; García, M. A. Chitosan molecular weight effect on starch-composite film properties. Food Hydrocoll. 2015, 51, 281-294.
https://doi.org/10.1016/j.foodhyd.2015.05.018

[45]. Lourdin, D.; Coignard, L.; Bizot, H.; Colonna, P. Influence of equilibrium relative humidity and plasticizer concentration on the water content and glass transition of starch materials. Polymer (Guildf.) 1997, 38, 5401-5406.
https://doi.org/10.1016/S0032-3861(97)00082-7

[46]. Reddy, N.; Yang, Y. Citric acid cross-linking of starch films. Food Chem. 2010, 118, 702-711.
https://doi.org/10.1016/j.foodchem.2009.05.050

[47]. Suyatma, N. E.; Tighzert, L.; Copinet, A.; Coma, V. Effects of hydrophilic plasticizers on mechanical, thermal, and surface properties of chitosan films. J. Agric. Food Chem. 2005, 53, 3950-3957.
https://doi.org/10.1021/jf048790+

[48]. Zhong, Y.; Zhuang, C.; Gu, W.; Zhao, Y. Effect of molecular weight on the properties of chitosan films prepared using electrostatic spraying technique. Carbohydr. Polym. 2019, 212, 197-205.
https://doi.org/10.1016/j.carbpol.2019.02.048

Most read articles by the same author(s)

Most read articles by the same author(s)

TrendMD

Dimensions - Altmetric - scite_ - PlumX

Downloads and views

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...
License Terms

License Terms

by-nc

Copyright © 2024 by Authors. This work is published and licensed by Atlanta Publishing House LLC, Atlanta, GA, USA. The full terms of this license are available at https://www.eurjchem.com/index.php/eurjchem/terms and incorporate the Creative Commons Attribution-Non Commercial (CC BY NC) (International, v4.0) License (http://creativecommons.org/licenses/by-nc/4.0). By accessing the work, you hereby accept the Terms. This is an open access article distributed under the terms and conditions of the CC BY NC License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited without any further permission from Atlanta Publishing House LLC (European Journal of Chemistry). No use, distribution, or reproduction is permitted which does not comply with these terms. Permissions for commercial use of this work beyond the scope of the License (https://www.eurjchem.com/index.php/eurjchem/terms) are administered by Atlanta Publishing House LLC (European Journal of Chemistry).