European Journal of Chemistry

Tensile strength and dynamic mechanical analysis of new IPNs based on epoxy resin-polysulphide elastomer

Article Sidebar

PDF
Published: Sep 30, 2016
DOI: https://doi.org/10.5155/eurjchem.7.3.352-356.1459
Keywords:
DMA, Epoxy resin, Polysulphide, Impact strength, Tensile strength, IPNs preparation, Interpenetrating polymer networks
Section
Research Article
Issue
Vol. 7 No. 3 (2016): September 2016
Dates
Received 2016-05-18
Accepted 2016-07-25
Published 2016-09-30


Main Article Content

Widad Salih Hanoosh
Chemistry Department, College of Science, University of Basra, Basra, 61001, Iraq
Hind Mahde Saleh
Chemistry Department, College of Science, University of Misan, Misan, 62001, Iraq

Abstract

The toughness of diglycidyl ether of bisphenol, an epoxy resin with polysulphide was investigated. Several interpenetrating polymer networks based on epoxy resin and different weight percentage of polysulphide were prepared and characterized by dynamic mechanical analysis technique. From the result, the glass transition temperature of these systems was lower than glass transition temperature of epoxy alone and also the impact strength was increase with increasing percentage of polysulphide.


icon graph This Abstract was viewed 1137 times | icon graph Article PDF downloaded 635 times

How to Cite
(1)
Hanoosh, W. S.; Saleh, H. M. Tensile Strength and Dynamic Mechanical Analysis of New IPNs Based on Epoxy Resin-Polysulphide Elastomer. Eur. J. Chem. 2016, 7, 352-356.

Article Details

Share
Links for Article


Crossref - Scopus - Google - European PMC
Crossref
Scopus
Google Scholar
Europe PMC
References

[1]. Lee, H.; Neville, K. Handbook of epoxy resine, New York, McGraw-Hill, 1967.

[2]. Troev, K.; Grancharov, G.; Tsevi, R.; Tsekova, A. Polymer 2000, 41(19), 7017-7022.
http://dx.doi.org/10.1016/S0032-3861(00)00054-9

[3]. Li, J. Polymer Bull. 2006, 56(4), 377-384.
http://dx.doi.org/10.1007/s00289-005-0492-0

[4]. Spering, L. H.; Mishra, V. Polym. Adv. Technol. 1995, 7(4), 197-208.
http://dx.doi.org/10.1002/(SICI)1099-1581(199604)7:4<197::AID-PAT514>3.0.CO;2-4

[5]. Dean, K.; Cook, W.; Zipper, M.; Burchill, P. Polymer, 2001, 42(4), 1345-1359.
http://dx.doi.org/10.1016/S0032-3861(00)00486-9

[6]. Lin, M. S.; Chang, R. J. J. Appl. Polymer Sci. 1992, 46(5), 815-827.
http://dx.doi.org/10.1002/app.1992.070460509

[7]. Sarathi, R.; Sahu, R. K.; Rajeshkumar, P. Mater. Sci. Eng. A 2007, 445-446, 567-578.
http://dx.doi.org/10.1016/j.msea.2006.09.077

[8]. Clayton, A. M. Epoxy Resin; Chemistry and Technology, 2nd edition, Marcel Decker, New York, 1988.

[9]. Hanoosh, W. S.; Mohammed, E. Malaysia Poly. J. 2009, 4(2), 52-61.

[10]. Mahesh, K. P. Polymer 2004, 16(3), 391-404.

[11]. Levita, G.; Petrise, D.; Marchetti, A.; Lazzeri, A. J. Mater. Sci. 1991, 26(9), 2348-2352.
http://dx.doi.org/10.1007/BF01130180

[12]. Kathrene, D.; Cook, W. D. Macromolecules 2002, 35(21), 7942-7954.
http://dx.doi.org/10.1021/ma020628p

[13]. Shaw, S. J. In Rubber Toughened Engineering Plastics, Chapman & Hall, London, 1994, pp. 165-209.
http://dx.doi.org/10.1007/978-94-011-1260-4_6

[14]. Haopeng, C.; Jun, W.; Xiang, W.; Renxin, X. J. Wuhan Univ. Tech. Mater. Sci. Ed. 2007, 22(2), 256-260.

[15]. Chen, C. H.; Chen, M. H. J. Appl. Polymer Sci. 2006, 100, 323-328.
http://dx.doi.org/10.1002/app.23195

[16]. Zaitseva, E. I.; Donskoi, A. A. Polym. Sci. Ser. D 2008, 1, 289-297.
http://dx.doi.org/10.1134/S1995421208040163

[17]. Makashir, S. P.; Agawane, T. N.; Mahajan, R. R.; Agrawal, P. J. Indian J. Eng. Mater. Sci. 2001, 8, 381-385.

[18]. Abdouss, M.; Farajpour, T.; Deraskhshani, M. Iran. J. Chem. Eng. 2011, 30(4), 37-44.

[19]. Kumar, D. K.; Kothandaraman, B. Exp. Polymer Lett. 2008, 2(4), 302-311.
http://dx.doi.org/10.3144/expresspolymlett.2008.36

[20]. Tong, J.; Bai, R.; Pan, C.; Goethals, E. J. J. Appl. Polymer Sci. 1995, 57, 895-901.
http://dx.doi.org/10.1002/app.1995.070570801

[21]. Souza, J. P. B.; Reis, J. M. L. Appl. Adhesion Sci. 2013, 1(6), 2-10, DOI: 10. 1186/2196-4351-1-6.

Supporting Agencies

Chemistry Department, College of Science, University of Basra, Basra, Iraq
Most read articles by the same author(s)
TrendMD

Dimensions - Altmetric - scite_ - PlumX

Downloads and views

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...
License Terms

License Terms

by-nc

Copyright © 2024 by Authors. This work is published and licensed by Atlanta Publishing House LLC, Atlanta, GA, USA. The full terms of this license are available at https://www.eurjchem.com/index.php/eurjchem/terms and incorporate the Creative Commons Attribution-Non Commercial (CC BY NC) (International, v4.0) License (http://creativecommons.org/licenses/by-nc/4.0). By accessing the work, you hereby accept the Terms. This is an open access article distributed under the terms and conditions of the CC BY NC License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited without any further permission from Atlanta Publishing House LLC (European Journal of Chemistry). No use, distribution, or reproduction is permitted which does not comply with these terms. Permissions for commercial use of this work beyond the scope of the License (https://www.eurjchem.com/index.php/eurjchem/terms) are administered by Atlanta Publishing House LLC (European Journal of Chemistry).